Laserworld CS-1000RGB MKIII Analogue Laser Projector 1000mW

Product Description

A powerful semi-professional pure diode laser, capable of intense standard laser effects like beams, waves and tunnels but also basic graphics. This laser has easy plug and play, sound-to-light and stand-alone modes, DMX control, so it can be controlled with the rest of your lighting, but also has an ILDA port for professional computer control. Of course, the Laserworld CS-1000RGB MKIII can also be operated in master-slave mode. Perfect for small to medium sized nightclub installs, indoor events and mobile DJs. The Laserworld CS-1000RGB MKIII show laser projector comes with a completely new designedÊcompactÊhousing, which isÊlight weightÊand has a stable bracket. The solid bracket allows forÊdifferent mounting positions: a hanging as well as a standing installation is possible - ideal for mobile DJs and temporary laser shows, but also for fixed installations at a truss or at the ceiling. The Laserworld CS-1000RGB MKIII is a pure diodeÊmulti color RGB laserÊsystem with a total output power ofÊup to 1'000 mWÊand a guaranteed output power of 800 mW. The red laser source has an output power of 200 mW / 650 nm, the green 70 mW / 520 nm and theÊroyal-blueÊlaser source has an output power of 530 mW / 450 nm. The laser sources ensureÊbrilliant colors and powerful laser beams. The projector hasÊgood beam specificationsÊwith ca. 3 mm / 1.1 mrad. The galvo system has a scan speed of up to 28 kpps @ 8¡ ILDA. Pattern size can be set by two rotary buttons (X and Y axis) on the rear side of the housing. The sensitivity of the microphone can be adjusted via the integrated display. ThroughÊDMX, in theÊautomatic modeÊas well as in theÊsound-to-lightÊmodeÊca. 130 (layers, tunnels, fences, waves, etc.)Êcan be projected in different colors and in various speed. If the automatic mode is active, the pre-programmed patterns run without assistance and in the sound-to-light mode, the laser system projects according to the sound. Next to the modes mentionedÊ above, this laser projector provides aÊmaster-slave-mode. Show lasers of the same series (slave projectors), connected via DMX to a main projector (master projector) project the same patterns like the master projector. The Laserworld CS-1000RGB MKIII isÊcomputer controllable through a professional ILDA interface. ThusÊcustom or pre-programmed lasershows, logos, texts or own graphics and animations can be shown in combination with a laser control software. There areÊsafety featuresÊlike a key switch, an interlock connector and an on-off switch. The Laserworld CS-1000RGB MKIII is ideal forÊsmall to semi-professional applicationsÊand is perfectly suitable inÊbars, small to medium sized clubs and discosÊas well as forÊmobile DJs, private useÊand in any other party location.