Product Description
The Laserworld CS-4000RGB FX is a powerful, pure diode laser, capable of intense standard laser effects. Also, it can project basic graphics, plus, it has 2 built-in grating effects. Easily plug-in and play using sound-to-light and stand-alone modes. Additionally, control this laser with the rest of your lighting system via DMX. Otherwise, use the ILDA port for computer control.
CS-4000RGB FX is a pure-diode, analog-modulated, full-colour RGB laser system. It has a total output power of up to 4,000 mW and guaranteed output power of 3,500 mW. CS-4000RGB's red laser has an output power of 850 mW / 635 nm. Its green laser has an output of 850 mW / 520 nm and the royal-blue laser has an output power of 1'800 mW / 450 nm.
Because of its powerful diode-laser source, this laser is much more visible than most standard lasers. Additionally, the projector has a beam diameter of ca. 3 mm and beam divergence of 1.4 mrad. The CS-4000RBB's galvo system has a scan speed of up to 28kpps @ 8¡ ILDA.
CS-4000RGB has layers, tunnels, fences, waves and more, stored on the laser, these effects offer a variety of combinations for impressive illumination. Afterwards, utilise the grating effects to make the projected patterns appear as if they were displayed by many projectors at the same time. As a result, you can create a unique light show and pattern that would not be able to be achieved in any other way
Adjust the pattern size by two rotary buttons on the rear side of the housing. Furthermore, adjust the sensitivity of the microphone for automatic modes via the integrated display. Taking a look inside, there is no airflow in this laser's optical compartment as its temperature is regulated via the separate cooling-fins compartment. This therefore reduces maintenance and cleaning requirements to a minimum.
Control the CS-4000RGB through DMX, stand-alone mode as well as in the sound-to-light mode. When doing so, you can project in different colours and in various speeds. Also, if the stand-alone mode is active, the pre-programmed patterns run without assistance. However, if the unit is in the "sound-to-light" mode, the laser system projects according to the sound.
Additionally, this laser projector provides a master-slave mode. After that, control the CS-4000RGB FX by a computer through a professional ILDA interface. Thus, you can pre-program laser shows, and use logos, texts or your own graphics and animations with laser control software (e.g. Showeditor or Showcontroller).
CS-4000RGB comes with safety features like a key switch, an interlock and an on-off switch. Also, this laser has compact housing, which is lightweight and comes with a stable bracket attatched. The 360¡ mounting bracket allows for different mounting positions, ideal for mobile DJs and temporary laser shows, but also for fixed installations at a truss or at the ceiling.
