The tarm 11 OUTDOOR are especially designed for outdoor laser installations. They come equipped with the top quality laser setup known from the standard tarm units, but have a waterproof enclosure that not only protects the components inside from water, but also shields off direct heat from solar exposure. A specially designed roof in front of the output window prevents it from getting impacted by direct rain. To cope with varying temperatures, the tarm OUTDOOR units are equipped with an active watercooling system, that is built into the housing. An active heating system helps to keep the laser systems operational even at low temperatures. Thus the tarm 11 OUTDOOR lasers can be used at environmental temperatures between -10¡C and +45¡C. A CT Scanner upgrade with LAS Turboscan drivers is available for the tarm 11 OUTDOOR to achieve top end quality graphics results.
The tarm 11 OUTDOOR isÊmade in GermanyÊand is aÊcompactÊshow laser system that is ideally suited forÊtop professional laser show applications of any kind. It is built with the latest RTI semiconductor laser modules that are specially designed in a way to keep spot size as well as divergence equal on both x- and y-axis. This is significantly advantageous over solutions with a very good divergence on one axis, but a bad divergence on the other. The laser modules inside the tarm 11 OUTDOOR are different - the spot size and shape is equal for all colors and on both axis
The beam specifications of the new tarm 11 OUTDOOR are given with only ca. 5.0 mm diameter and <0.8 mrad divergence - which applies to both axis. The extremely small beam diameter allows for the use of very small mirrors, which results in reduced inertia and thus very good scanning performance.
