Product Description
DJ Controller
The Pioneer DJ DDJ-REV1 matches perfectly with the free Serato DJ Lite software, boasting a brand-new battle-style layout that’s easy to use and perfect for playing like a pro.
Pioneer DJ DDJ-REV1
The DDJ-REV1 matches perfectly with the free Serato DJ Lite software. Above all, it boasts a brand-new battle-style layout that’s easy to use and perfect for playing like a pro. The design of this 2-channel DJ controller emulates a professional DJM-S mixer + PLX turntable setup. It includes specialized features for open-format and scratch DJs.
Check out the DDJ-REV1 battle-style layout.
Get hands-on with an interface designed to emulate the kind of setup used by pro battle DJ’s use. In other words, 2 x PLX turntables and a DJM-S series mixers. There’s plenty of space to perform mixing and scratching techniques thanks to the new arrangement of the DDJ-REV1.
The tempo sliders are 60m, longer than those on the DDJ-SB3 to give you finer control. The sliders run horizontally above the decks. The Performance Pads are now in the mixer section so you can intuitively combine effects, trigger samples, and scratch tracks.
Lever FX
Dynamically add texture to the music with Lever FX on the DDJ-REV1. Pull the levers down and hold them to apply effects from Serato DJ Lite in short bursts. Push them up to lock on effects and free up your hands for scratching or track browsing.
Tracking Scratch: Get a helping hand with scratching
The Tracking Scratch feature silently takes the music back to the cue point the moment you move the jog wheel. This saves you from closing the fader and finding the right place in the music to start the scratch again.
Mixed microphone audio: Easily add your voice while you’re streaming with the DDJ-REV
The output of the master audio is mixed with the sound from the microphone if you have one plugged in. Therefore, you don’t need any external equipment such as a soundcard or separate mixer if you want to add speech or vocals to your performance.
DDJ-REV1 offer Serato DJ Lite integration: Enjoy full use of the free software
As soon as you’ve downloaded Serato DJ Lite to your PC/Mac for free, you can simply connect the DDJ-REV1 via the supplied USB cable and start DJing. Enjoy tactile control of various features and effects in the software by manipulating the buttons, knobs, faders, and jog wheels on the controller.
Lastly, with the Scratch Bank pad mode, you can instantly load scratch samples from 4 banks that you’ve assigned in Serato DJ Lite or Pro by simply tapping the dedicated Scratch Bank button.
Compatible DJ Software
- Serato DJ Lite
- Serato DJ Pro (License/subscription not included)
Software System Requirements
- Serato DJ Lite
- Serato DJ Pro
What’s in the box
- DDJ-REV1
- USB cable
- Warranty (for some regions)
- Quick start guide
- Precautions for use
Channels: 2
Deck Control: 4
Trim knob: Yes
Jog Wheel: 154 mm
Filter: Yes
Sampler: Yes
Hot Cues: 4
Pad Modes:
- Hot Cue
- Auto Loop
- Tracking Scratch
- Sampler: Trans
- Scratch Bank
Inputs: 1 MIC (1/4 inch TS Jack)
Outputs:
- 1 MASTER (RCA)
- 1 PHONES (3.5-mm stereo mini-jack)
USB: 1 USB B port
Width: 526 mm
Height: 59.2 mm
Depth: 255.5 mm
Weight: 2.1 kg
Soundcard: 24 bit/48 kHz
Frequency Range: 20 – 20000 Hz
Signal-to-Noise Ratio: 103 dB
Distortion: < 0.005 %
Power Supply: USB Type-B bus powered
Power Consumption: 5V 500mA
